Garmin GPS 120XL - Manual (Page 28)

Editing Existing Waypoints
The waypoint definition page also allows you to
change the name, coordinates, comment or reference
waypoint field for a stored waypoint (Fields shown on
page 22).
To edit the name, coordinates, comment, or refer-
ence waypoint field:
1. Use
U
and
D
to highlight the field you want to
edit.
2. Press F to begin entry in the selected field.
3. Enter your new data.
4. Press the F key to confirm your changes.
Waypoint Comments
Each waypoint stored in the GPS 120XL has a user-
defined 16-character comment field. The default com-
ment is the UTC date and time of the waypoint’s
creation.
To change or add a comment:
1. Use the
U
and
D
keys to highlight the comment
field.
2. Press
F
to begin entry of your comment.
3. Enter the comment and press the F key to confirm.
Renaming and Deleting Waypoints
The rename and delete function fields are located at
the bottom left of the waypoint definition page (you’ll
need to use the
L
key to move the field highlight out of
its standard up-and-down scrolling sequence).
Editing,Deleting
& Renaming
Waypoints
REFERENCE
24
The waypoint comment
field will automatically dis-
play the date and time of
creation of the waypoint.
You may replace this with a
16-character custom com-
ment at any time.
To access the rename func-
tion from the waypoint def-
inition page, highlight the
‘RENAME?’ prompt and
press ENTER.
120XL Man RevB 7/10/98 10:55 AM Page 24