Garmin GNC 250XL - Manual (Page 98)

Data transfer page
APPENDIX
A
NAVDATA CARD
Saving User Data
Restore data page
To restore user data from a user data card to the GNC 250XL:
1. Install the user data card.
2. Rotate
O
to highlight ‘Restore user data?’.
3. Press
E
.
The GNC 250XL will ask you which type of data to replace. You may choose
checklists, scheduler messages, user waypoints, proximity waypoints, routes, waypoint
comments, or all data.
4. Rotate K to select the type of data to replace.
You may either replace or update the information in the database. Replacing the
data will replace ALL user data with the data from the card. Updating the data will
not delete unrelated material, but will only change what is necessary to use the data
received from the user data card.
5. Rotate
O
to select either ‘Replace?’ or ‘Update?’.
6. Press E to begin transferring data to the GNC 250XL. The GNC 250XL will now transfer
all of the data requested. This may take a few minutes.
7. To continue with more data transfer types, repeat steps 4, 5 and 6. Otherwise, press E
when ‘ok?’ is highlighted.
8. Turn the GNC 250XL off and replace the user data card with a NavData card. The GNC
250XL is now ready for normal operation.
88
250xl manual 2 7/17/98 1:33 PM Page 88