Garmin nuvi 2585TV - Manual (Page 2)

2 nüvi 2585TV Quick Start Manual
Getting Started

WARNING
See the Important Safety and Product Information
guide in the product box for product warnings and
other important information.
When using your device for the first time, complete
these tasks.
1 Mount the device ( page 2 ).
2 Register the device ( page 3 ).
3 Check for updates.
• Software updates (
page 3 ).
• Free map update ( page 3 ).
4 Download the full owner’s manual ( page 3 ).
Mounting the Device

WARNING
This product contains a lithium-ion battery. To
prevent the possibility of personal injury or product
damage caused by battery exposure to extreme
heat, remove the device from the vehicle when
exiting or store it out of direct sunlight.
Notice
Before mounting the device, see the Important
Safety and Product Information guide for
information about laws pertaining to windshield
mounting.
Before you use your device on battery power, you
should charge the device.
1 Plug the vehicle power cable ➊ into the USB
port on the mount ➋ .
2 Snap the mount onto the suction cup ➌ .
➊
➋
➍
➌
3 Press the suction cup to the windshield.
4 While pressing, flip the lever ➍ back toward
the windshield.
5 Fit the bottom of your device into the mount.
6 Tilt your device back until it snaps into place.
7 Plug the other end of the vehicle power cable
into a power outlet in your vehicle.
8 If necessary, connect the external antenna
to the traffic receiver and secure it to the
windshield using the suction cups.
About myDashboard
You can use myDashboard to register your device,
check for software and map updates, access
product manuals and support, and more.
Setting Up myDashboard
1 Connect the mini-USB cable ➊ to the
mini-USB port ➋ on the device.