Garmin StreetPilot ColorMap - Manual (Page 65)

Reference
55
Creating a Route
5. To have intermediate points on the route, use this same procedure to select the first turn on the
route and press the ENTER key. If there is a single road that connects the new point and the
previous point, the route will follow that road. Otherwise, your route will follow a straight line
between the two points.
6. If you desire to have more intermediate turns (points) on the route, repeat step 5 as necessary.
(Continued on page 56)
Zoom out if necessary
Note How Route Line follows HWY 101 Zoom Back in to point at ramp
Point to road intersections
Finding the Destination
Route Distance Displayed (Point to Point)
Entering last turn
Additional Information: In order for the route to follow roads, it is necessary to select all intermedi-
ate turns, including on and off-ramps. The advantages of having the route follow the roads are that the
distances and times are more accurate, and the turn guidance is more specific, among others.