Garmin StreetPilot ColorMap - Manual (Page 18)

8
Quick-Start
You can start the Simulator Mode if you are indoors where the StreetPilot is unable to receive
signals from GPS satellites. It is useful to do this when planning a trip or finding cities, and (if using
MetroGuide Map Data) addresses, intersections, or businesses.
To start the Simulator Mode:
1. Press the OPTION key twice. The StreetPilot displays the System Setup menu. The ‘General’ file
tab should be displayed, and the cursor should be on the ‘Simulator’ field. If not, use the
ROCKER keypad to select the ‘Simulator’ field (top left picture).
2. Press the ENTER key and use the ROCKER keypad to select On (bottom left picture).
3. Press the ENTER key again to start the Simulator Mode.
4. Press the PAGE key or QUIT key to return to the page the StreetPilot was previously displaying.
Simulator “On” Selection
Using the Simulator