Garmin GPS 45 - Manual (Page 65)

The GPS 45 power/data cable can be connected to
the mounting bracket for hard-wired fixed-mount use.
To attach the power/data cable, slide the cable connec-
tor into the mounting slot on the bracket (see below).
57
Appendix G
Installation
To insert the GPS 45 into the bracket, snap the unit
into place from the front of the bracket and press firmly.
If you are using the power/data cable, make sure you
install the power/data connector in the mounting bracket
before inserting the unit in the bracket.
Using the mounting bracket without the swivel base.
45 manual Rev. B 8/4/98 11:11 AM Page 57