Garmin GPS 45 - Manual (Page 64)

56
The GPS 45’s optional mounting bracket allows fixed
installation on any flat surface or bulkhead, and per-
mits easy removal for portable use. The mounting kit
can be installed with or without the swivel base.
To install the bracket on a flat surface or on a
bulkhead without the swivel base, mount the L-bracket
directly to the surface desired with three #8 flathead
screws (not included). Once the L-bracket is installed,
the viewing angle may be adjusted by loosening the
knob at the bottom right of the bracket.
For swivel base installation, mount the swivel base directly to a flat surface with
three #8 flathead screws. Install the L-bracket onto the swivel base using the knob
provided (see diagram below). The swivel angle may also be adjusted by loosening
the knob.
Appendix G
Installation
Swivel Adjustment Knob
Angle Adjustment Knob
Swivel Base
L-Bracket
45 manual Rev. B 8/4/98 11:11 AM Page 56