Garmin StreetPilot 2650 - Manual (Page 82)

Appendix
72
Route Waypoint Memory is Full – The unit has no more space for map-based route waypoints (used for
turns).
Safe Mode is Turned On – The action attempted is disabled while moving to prevent distractions from
driving.
Storage Card Temperature Out of Range – Storage card is too hot/cold to run reliably. Check the
operating temperature. The card should start to function normally when the temperature has returned to
normal range.
Sunrise, Switching to Day Mode – The map is switching to the Day Mode display.
Sunset, Switching to Night Mode – The map is switching to the Night Mode display.
That Route Name is Already Used – The route name you have entered is already being used by another
route.
Track Data Transfer Complete – Track data has successfully been transferred to the unit.
Track Memory is Full – Track log memory is full. No additional track log data can be stored without
deleting old data to create memory space.
Track Truncated – A complete uploaded track will not fit in memory. The oldest track log points were
deleted to make space for the most recent data.
Waypoint Data Transfer Complete – Waypoint data has successfully been transferred to the unit.
Waypoint Memory is Full – You have used all available waypoints. Delete unwanted waypoints to make
space for new entries.
Waypoint Name Already Used: – The waypoint name you have entered is already used by
another waypoint. Choose a different name.
Appendix F: Messages