Garmin GPSCOM 170 - Manual (Page 80)

Messages
APPENDIX E
Route is not Empty—You have attempted to copy
into a route already in use.
RTCM Input has Failed—DGPS data being
received has been lost. You are no longer receiving
the beacon signal.
Searching the Sky—The unit is searching the sky
for almanac data or the unit is in AutoLocate mode.
Stuck PTT—The unit is continuously transmit-
ting due to a stuck microphone condition.
Stored Data was Lost—All waypoints, routes,
time and almanac data has been lost due to battery
failure or clearing the receiver’s memory.
Transfer has been Completed—The receiver is
finished uploading or downloading information to
the connected device.
Weather Alert Tone Detected—The unit has
detected the NOAA severe weather tone.
WPT Memory is Full—You have used all 250
waypoints. Delete unwanted waypoints to make
room for new entries.
75
170 manual pages rev D 9/21/98 9:23 AM Page 75