Garmin GPSCOM 170 - Manual (Page 34)

VHF Communication Pages
To move back and forth between the GPS and VHF
pages, press the
C
key. There are three com VHF
pages in a continuous loop: channel definition, com
setup, and memory bank. Press
C
to exit the GPS
pages and enter the com pages. Try scrolling through the
com pages by pressing
P
You can also scroll in the
opposite direction or return to a previous page by
pressing
Q
.
Press
P
repeatedly until you access the com setup
page.
Com Setup Page
The com setup page allows you to do the following:
• Change the mode of operation
• Customize the scanning setup
• Set the timeout feature (scanning delay)
• Select the band of operation
• Change the call channel
• Access the line of sight calculator page
Com Setup Page
VHF Com
Pages
Reference
29
Com Setup Page Channel Page Memory Bank Page
P
Q
170 manual pages rev D 9/21/98 9:23 AM Page 29