beautypg.com

Direct -to – Garmin GNC 250 User Manual

Page 13

background image

The GNC 250’s waypoint sequencing field allows you to ‘hold’ on a
selected waypoint and prevent the GPS from sequencing to the next
route waypoint. You may also use the hold mode with the course
select feature to maintain a user-defined course to the hold waypoint.

TO HOLD ON A WAYPOINT

:

❏

Set the waypoint sequencing field to the ‘hold’ setting by
highlighting the waypoint sequencing field and rotating

K

one stop in either direction.

❏

To enter a desired course to or from the destination waypoint,
highlight the ‘crs’ field and use

K

and

O

to enter the

desired course.

❏

Press

E

when finished.

DIRECT

-TO

Waypoint sequencing field set to AUTO.

Waypoint sequencing field set to HOLD.

WAYPOINT SEQUENCING AND HOLD MODE

250 Quick Ref 7/14/98 9:14 AM Page 13

See also other documents in the category Garmin GPS receiver: