Garmin GNC 250 - Manual (Page 12)

The GNC 250’s direct-to confirmation page may also be used to select a destination waypoint, review a waypoint’s position,
facility name or location, and manually set a course to/from the destination.
TO SELECT A DIRECT - TO DESTINATION :
❏ Highlight the identifier field and enter the identifier using K and O . Press E when finished.
TO REVIEW THE LOCATION / FACILITY NAME OF THE DIRECT - TO WAYPOINT :
❏ Highlight the location field and rotate K .
TO ENTER A DESIRED COURSE TO OR FROM THE DESTINATION WAYPOINT :
❏ Highlight the course select (‘crs’) field and use
K
and
O
to enter the desired course. Press
E
when finished.
USING THE DIRECT - TO CONFIRMATION PAGE
DIRECT
-T
O
250 Quick Ref 7/14/98 9:14 AM Page 12