Garmin nuvi 465TF - Manual (Page 6)

6 nüvi465quickstartmanual
Add a Stop
1. With a route active, touch Menu >
Where To? .
2. Search for the extra stop.
3. Touch
Go! .
4. Touch Add as a Stop to add this stop
before your final destination.
tip: To add more than one stop,
touch Where to? > routes . Select
the current route, and touch add or
remove points .
Route to Next Stop
If you have multiple stops on your route,
you can stop navigating to the current
stop and start navigating to the next stop.
1. With a route active, touch Menu >
Route .
2. Touch Next Stop .
3. Select the next stop.
4. Touch
Yes .
Use FM TMC Traffic
note: Garmin ® is not responsible for
the accuracy of the traffic information.
The FM Traffic Message Channel (TMC)
traffic receiver is integrated in the vehicle
power cable.
The traffic receiver and the nüvi must
be in data range of an FM station
transmitting TMC (Traffic Message
Channel) data to receive traffic
information. For information about traffic
receivers and coverage areas, go to
www.garmin.com/traffic .
note: Heated (metallized) windows
could degrade the performance of the
traffic receiver.
note: You do not need to activate
the subscription included with your
FM traffic receiver. The subscription
activates automatically after your nüvi
receives traffic signals from the pay
service provider.