Olympus VR-325 - Manual (Page 4)

4 EN
3
Multi-connector
The battery is not fully charged at the time of
purchase. Before use, be sure to charge the battery
until the indicator lamp turns off (up to 3 hours).
If the indicator lamp does not light, the camera is not
correctly connected or the battery, camera, or USB-
AC adapter may not be functioning as expected.
Date, time, time zone, and language
1
Press the n button to turn on the
camera.
The date and time setting screen is displayed when
the date and time are not set.
2
Use FG to select the year for [Y].
3
Press I to save the setting for [Y].
4
As in Steps 2 and 3, use FGHI and the
Q button to set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D] (date order).
5
Use HI to select your home time zone and
press the Q button.
Use FG to turn daylight saving time ([Summer])
on or off.
6
Use FGHI to select your language and
press the Q button.
●
●
Shooting with the optimum aperture
value and shutter speed
[Program Auto]
1
Press the n button to turn on the
camera.
If the [Program Auto] indicator is not displayed, press
H to display the function menu and then set the
shooting mode to P.
Press the n button again to turn off the camera.
2
Hold the camera and compose the shot.
3
Press the shutter button halfway down to
focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
4
To take the picture, gently press the shutter
button all the way down while being careful
not to shake the camera.
Using the fl ash
1
Select the fl ash option in the function menu.
2
Use HI to select the setting option, and
press the Q button to set.
Shooting movies
1
Press the R button to start recording.
2
Press the R button again to end recording.
Viewing images
1
Press the q button.
2
Use HI to select an image.
●
●