beautypg.com

Information features – Acura 2012 MDX Navigation User Manual

Page 92

background image

Navigation System

91

ACURA MDX KA 31STX850

Information Features

To perform a conversion:

1. Enter a numeric value to be converted

(for example, 1000).

2. Move the Interface Dial down to

select UNIT CONVERSION. The
screen changes to:

3. Rotate the Interface Dial knob to

select the type of unit you want to
convert (for example, Length) and
push in on the Interface Dial to
select. The screen for that conversion
type appears (see illustration in step
4).

4. Select the base unit (e.g., mm) that

you wish to convert to some other
unit. All other units will change
automatically depending on the base
unit value. In the example below,
1000 mm converts to 100 cm, 1 m,
etc.

NOTE:
• If you do not enter a value to be

converted, only “Temperature” units
are selectable.

• Conversions using negative values

may produce meaningless or
physically impossible values.

• To return the

Calculator

screen,

select CALC. by moving the
Interface Dial to the right.

System/Device Information
Say or select System/Device
Information
while on the

INFO

screen

(

Other

), and the display will change as

indicated below.

You will need this information when
ordering an update. See page 133 for
more information.

00 ACURA MDX_KA.book 91 ページ 2011年7月27日 水曜日 午前11時6分

This manual is related to the following products: