Dot tire quality grading (u.s. vehicles) – Acura 2014 ILX User Manual
Page 290

289
uu
Checking and Maintaining Tires
u
DOT Tire Quality Grading (U.S. Vehicles)
Continued
DOT Tire Quality Grading (U.S. Vehicles)
1
Uniform Tire Quality Grading
14 ACURA ILX-31TX66100.book 289 ページ 2013年3月7日 木曜日 午前11時33分
QRG
Index
2014 ILX
Main
tenan
ce
TOC
■
Uniform Tire Quality Grading
■
Treadwear
The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are
also graded for treadwear, traction, and temperature performance according to
Department of Transportation (DOT) standards. The following explains
these gradings.
Quality grades can be found where applicable on the tire sidewall between tread
houlder and maximum section width.
The treadwear grade is a comparative rating based on the wear rate of the tire
when tested under controlled conditions on a specified government test
course. For example, a tire graded 150 would wear one and one-half (1 1/2)
times as well on the government course as a tire graded 100. The relative
performance of tires depends upon the actual conditions of their use, however,
and may depart significantly from the norm due to variations in driving habits,
service practices and differences in road characteristics and climate.
For example:
Treadwear 200
Traction AA
Temperature A
All passenger car tires must conform to Federal
Safety Requirements in addition to these grades.