Make sure monitor power led on or blinking – Acura Embedded PowerBrick ATOM User Manual
Page 4
PowerBrick - ATOM™ Quick Reference Manual
Copyright by Acura Embedded Systems Inc. Updated by August 09/13
3.8 Operation and maintenance
This module requires no routine maintenance. The blue LED indicator when lit
indicates proper operation and health.
The power supply must be protected by a 7A auto fuse on the input line from the
vehicle battery.
Before power up the computer, make sure all cables connected to the computer
and the monitor.
WARNING
First hookup all cables then turn on computer powerSwitch.
Make sure monitor power led on or blinking .
3.9A Power Brick Wiring Diagram
Computer connector :
pin1-Ground
pin2-DC+ 9~36V
page 6
With the unique set of products, Acura Embedded Systems Inc. remains
committed to its goal of providing trouble-free and customer-friendly service.
A special customer service unit has been set up specifically to cater to our
esteemed customers' needs.
Technical Support:
Phone:1-866-502-9666
Email:
Mail address:
Acura Embedded Systems Inc.
Unit #1, 7711-128th Street
Surrey, BC V3W 4E6
CANADA
Ph: (604) 502-9666 Fax: (604) 502-9668