Acura Embedded AcuPanel 19 - Manual (Page 77)

Chapter 4: BIOS Setup
Intel® IGD Configuration
This section is used to configure the Intel® IGD Graphic configurations.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
Main Advanced Chipset Boot Security
Intel IGD Configuration
IGFX - Boot Type
LCD Panel Type
Backlight Control Select
Backlight On/Off Reverse
Backlight Dimming Control Select
Backlight
Fixed Graphics Memory Size
[LVDS]
1280x1024 (19inch)
[Pyroelectric sensor]
[Normal]
[Manual]
[100%]
[128MB]
IGFX - Boot Type
Save & Exit
Select the Video Device
Which will be activated
during POST.
This has no effect if
external graphics present.
CRT
LVDS
LVDS + CRT
CRT + HDMI
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Backlight On/Off Reverse
Please configure this option only when changing the panel, otherwise the
display may not work.
Backlight Dimming Control Select
The options are Tact Switch, Manual and Light sensor.
The default setting is Tact Switch for AcuPanel 19 and the
Backlight option below will not be configurable, please use the brightness
button on the panel to adjust it.
Backlight
Adjusts the brightness of the backlight.
Fixed Graphics Memory Size
This field is used to configure the memory size of the fixed graphics, the
options are 128MB and 256MB.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
IGFX - Boot Type
This field is used to configure which video device will be activated during
POST. This has no effect if external graphics present. The options are CRT,
LVDS, LVDS + CRT and CRT + HDMI.
Backlight Control Select
The available options are Pyroelectric sensor and Tact Switch. The default
setting is Tact Switch for AcuPanel19, and the Backlight On/Off button is functional
only in this mode.
72