Actron CP9449 ABS BrakeScan - Manual (Page 14)

1
This code indicates that you have had
a problem with the Pump Motor Circuit
long enough to be stored in long-term
memory and that the problem is illumi-
nating the ABS malfunction indicator
lamp (MIL) on the dashboard. ABS sys-
tems rely on a pump to regulate brake
fluid distribution.
This code indicates that you have a
current problem with the Network Bus
Communication for the ABS controller
and that the problem is illuminating the
ABS malfunction indicator lamp (MIL) on
the dashboard.
Reviewing Codes
To review the codes stored in memo-
ry, from either the Main Menu or the
Diagnostics Menu, select Review
Codes.
To view the codes, press the p UP or
q DOWN arrow keys.
Code Lookup
From the Diagnostic Menu, select Code Lookup.
Press the p UP or qDOWN arrow key until Code Lookup is
highlighted.
Press
ENTER.
Enter a Code.
Codes come in two formats OBDII
and Non-OBDII.
All characters must be entered.
Only one character can be
changed at a time.
1.
2.
1.
•
•
2.
•
•
•
C0000
Use  Arrow Keys
to Change digit.
Use   to Select
digit to change.
ENTER to Show Code.
C0110
Pump Motor Circuit 

History MIL Code
2 of 3
ABS
U2100
Controller Area 
Network Bus
Communication

Current MIL Code
3 of 3
ABS
MAIN MENU
=====================
Vehicle Diagnostics
Review Codes
System Setup