Activeforever EZ Bathe Inflatable Tub - Manual (Page 2)

(A) WET & DRY VACUUM
(B) EXHAUST PORT
(C) SUCTION PORT
(D) GULPER ATTACHMENT
INTRODUCTION
The EZ-BATHE® inflatable tub is easy to use. Like
any new purchase, “practice makes perfect” so it is
suggested that you familiarize yourself with all of
the components and read this instruction sheet
in its entirety before use.
Although designed to fit hospital beds, the
EZ-BATHE inflatable tub can be used on any bed.
BEFORE YOU BEGIN
The illustration above is your guide. Please refer to
it and familiarize yourself with the various parts. We
suggest that you practice inflating/deflating the
tub & pillow and setting up the attachments
before attempting the actual bathing of your
patient.
CAUTION: Be sure that drain hose is connected
before attempting to fill EZ-BATHE with water.
HOW TO INFLATE & DEFLATE
The wet/dry vacuum has a
threefold purpose:
1. Inflates the tub & pillow
using the EXHAUST PORT
with the end of the hose.
The end of the hose is
slightly larger to assist in
avoiding over-inflation of
the tub (which may cause
seams to split, making
the EZ-BATHE
unusable). NOTE: The
vacuum hose does not
go inside the
INFLATING /
DEFLATING VALVE .
Simply hold the end of the hose over valve while inflating/deflating
your EZ-BATHE (see illustration). Hose should be held snug against
tub while squeezing the valve to allow airflow. Fill with air until tub is
firm but do not over-inflate.
2. Deflates the tub & pillow in the same manner as inflating, using the
opposite SUCTION PORT .
3. Vacuums up surplus water and debris using the SUCTION PORT and
GULPER ATTACHMENT .
NFLATING / DEFLATING VALVE
NOTE: Vacuum style and brand may vary.
WATER DRAIN
INFLATED PILLOW
INFLATED TUB
(25- FT DRAIN HOSE WITH BLUE PERFECT UNION &
YELLOW ON / OFF VALVE
25- FT SHOWER HOSE , HAND - HELD SHOWER , & FAUCET
ADAPTER
INFLATING / DEFLATING VALVE