Activeforever Eye-Vac EVPro Electric Dust Pan - Manual (Page 4)

BEFORE USING FOR THE FIRST TIME
1. Remove EYE-VAC PROFESSIONAL from packaging and set upright on any non-carpeted flooring. Remove
packing tape from Micro Exhaust Filter on the side of the unit.
2. Plug unit into any standard 120V AC electrical outlet.
3. Turn Control Dial to the MAN position for manual operation or to the AUTO position for automated use. The
POWER Indicator Light will illuminate when the Control Dial is in either of these positions.
Your EYE-VAC PROFESSIONAL is now ready for use.
OPERATING INSTRUCTIONS
NOTE: EYE-VAC PROFESSIONAL cannot operate when the Control Dial is in the OFF position.
1. Turn the Control Dial to the MAN position for manual operation or to the AUTO position for automated use.
The POWER Indicator Light will illuminate when the Control Dial is in either of these positions
2. In the MANUAL Mode, sweep debris towards the Inlet at the Base of the unit, press the Manual Activation
Button and let EYE-VAC PROFESSIONAL vacuum the debris through the Inlet and into the Collection Bin.
NOTE: The MANUAL Mode will run for 5 seconds. Depending on the amount of debris, it may be necessary to
press the Manual Activation Button more than once.
3. When the Control Dial is turned to the AUTO position, sweep debris towards the Inlet at the Base of the unit
and the Eye-Vac™ Sensors will detect the debris and automatically initiate a timed vacuuming cycle which
will terminate once the Eye-Vac™ Sensors no longer detect debris. EYE-VAC PROFESSIONAL will
vacuum the debris through the Inlet and into the Collection Bin without you ever having to bend over or
touch the dirt.
4. Use the Manual Activation Button to begin vacuuming in either the MANUAL or AUTO Modes.
5. As debris accumulates, the Collection Bin will need to be emptied. The Collection Bin Indicator Light lets
you know when it’s time to empty the Collection Bin.