ACR&Artex SARLink View PLB - Manual (Page 27)

Y1-03-0244H 27
APPENDIX E - USER INTERFACE: DIGITAL DISPLAY DURING EXTENDED
GPS TEST
The following chart describes the display and audio-visual feedback the beacon
provides during extended GPS Test. The messages on the digital display
typically appear as one or two words at a time, until the entire message has
been displayed.
AquaLink™ View and SARLink™ View display, LED/ Audio Signaling
and Description of Operation
GPS acquisition test has been initiated.
Reminder: GPS acquisition is optimized by giving the beacon a clear view of the sky.
Reminder that the extended GPS acquisition test is active. This message repeats for
approximately 100 seconds while the GPS is acquiring data.
The system informs you that the beacon has passed the extended GPS test.
GPS coordinates acquired during a successful test will scroll from right-to left.
Beacon has failed the extended GPS acquisition test after 10 minutes.
This message appears if extended GPS test failed. The system advises you to refer to
this Product Support Manual (User Book) for information on what to do and who to
contact.
Beacons built after 06/2010 will indicate the number of GPS acquisition test remaining
and the system test is complete.
LONG GPS DATA TEST START
GIVE CLEAR VIEW TO SKY
GPS TEST
SEE USER BOOK
LT: 26.03.033N LG: 80.10.066W
GPS TEST
√
G
NO GPS 
R
# GPS TEST LEFT