Acoustic Research PW1000 - Manual (Page 12)

Chapter 2: Setting Up the A/V Pass-Through Jacks
21
MP3 Audio (TV + A/V Receiver)
the unit. The jack on the front is a single 3.5mm stereo audio jack, commonly used on
To set up the MP3 Audio SpeedPass: Connect one set of plugs from a stereo audio
of plugs to an available set of audio input jacks on the back of your A/V receiver.
IMPORTANT: Make sure you make a note of the inputs you’re using for each connection.
USB (TV + A/V Receiver)
To set up the USB SpeedPass:
Make sure you make a note of the inputs you’re using for each connection.
PW1000 Back Panel
A/V Receiver
Back Panel
AUDIO
WARNING:
intended for data use only.
PW1000 Back Panel
A/V Receiver
Back Panel
USB IN
Chapter 2: Setting Up the A/V Pass-Through Jacks
22
TV Only (or TV + Sound System)
IMPORTANT: Remember that the more jacks you connect on the PW1000, the more jacks you’ll have available
on the front of the PW1000 for connecting portable devices.
BEFORE YOU START: Decide which inputs to use and write them down.
camcorder on the TV.
or
Blu-ray Satellite or cable
TV