Rmw 6170 – Acnodes RMW 6170 User Manual

Page 2

RMW 6170

17” 1920x1080 Full HD LCD monitor

6U Rackmount Display Panel

All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

Legal Information

First English printing, October 2002

Information in this doc ument has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this docum ent is subject to change without notice. W e are not liable for any injury or
loss that results from the use of this equipm ent.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for
future refe rence.

Unplug equipment before cleaning. Don

’t use liquid or spray detergent; use a m oist c loth.

Keep equipment away from excessive humidity and heat. Prefer ably, keep it in an air-conditioned environm ent with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

W hen installing, place the equipment on a sturdy, level s urface to prevent it from accidentally falling and c ausing

damage to other equipment or injury to persons nearby.

W hen the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to k eep it from overheating.

Arrange the equipment

’s power cord in such a way that others won’t trip or fall ov er it.

If you are using a power cord that didn

’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment

’s electric al ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment

’s ratings label.

Observe all precautions and warnings attached to the equipment.

If you don

’t intend on using the equipm ent for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fire or electrical shock.

Only qualified service personnel should open the chassis. Opening it yourself could dam age the equipment and

invalidate its warranty.

If any part of the equipment becomes damaged or stops functioning, have it chec ked by qualified service personnel.

W hat the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or m alfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product.

Repair or attem pted repair by anyone not authorized by us.

Any dam age of the product due to shipment.

Removal or installation of the product.

Causes ex ternal to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

R egulatory N otices Federal Communications C ommission (FCC )

This equipment has been tested and found to comply with the limits for a Class B digital device, purs uant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harm ful interference in a residential
installation.

Any changes or modifications made to this equipment may void the user

’s authority to operate this equipm ent. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, m ay cause harmful interference to radio communications.

However, there is no guar antee that interference will not occur in a particular installation. If this equipment does caus e
harmful interference to radio or televis ion reception, which c an be deter mined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following m easures:

Re-position or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.