Pch 6519 – Acnodes PCH 6519 User Manual

Page 5

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

PCH 6519

17” industrial Panel PC

IP65 rated fully enclosure

Stainless steel front bezel

Installations

Step1. Open the covers on the connectors

All IO on the rear side of LCD is well protected with a plastic cover. Before installing the monitor, user
needs to open it.

Step2. Power Cable Connection (3 pin)

The power cable is 3 pin IP65 connecter design in LCD side. User need to plug in and make the cable
fit the connector, then the O-ring on the cable will be squeezed as the protection ring is screwing clock-
wise.

Step3. VGA cable connection (only for LCD)

Connect the VGA cable to your PC. The VGA connector is 10 pin designs in LCD side, User need to
plug in and make the cable fit the connector, and then the O-ring on the cable will be squeezed as the
protection ring is screwing clockwise.

Step4. Touch interface (RS232/USB)

Connect touch interface to your PC, User need to plug in and make the cable fit the connector, and
then the O-ring on the cable will be squeezed as the protection ring is screwing clockwise.