Acnodes FPC 8759 - Manual (Page 33)

4. To switch on the power, select
"+12V". Please save the change
before exiting BIOS to avoid data
lost.
LCD Brightness Control Setting
Please note Brightness Control can only be set by setting jumper JP14 for
CCFL on the motherboard C48 V2.1. By default, the inverter is CCFL on the
motherboard jumper setting.
1. Power on the system, and press
the key when the system
is booting up to enter the BIOS
Setup utility.
2. Select the Advanced tab.
3. Select Power Configuration
COM/VGA Ports and press
to go to display the
available options.
4. To change the brightness, select
“Brightness Control” and press
. Choose the desired
brightness level (0~7) press
. Save the change by
pressing F10.
NOTE: the new brightness will
take effect after the system has
restarted.