Acnodes FES 2215 - Manual (Page 12)

2. COM 1 ( DB-9 ): RS-232/ 422/ 485 [refer to P.17-18, No. 8 jumper setting]
PIN RS-232 RS-422 RS-486
1 DCD# TX+ RTX+
2 RXD RX+ Not Used
3 TXD TX- RTX-
4 DTR# RX- Not Used
5 GND GND GND
6 DSR# Not Used Not Used
7 RTS# Not Used Not Used
8 CTS# Not Used Not Used
9 RI# Not Used Not Used
4 & 5. LAN 1 & 2 (RJ-45)
PIN Definition PIN Definition
1 Lan_TX1+ 2 Lan_TX1-
3 Lan_TX2+ 4 Lan_TX3+
5 Lan_TX3- 6 Lan_TX2-
7 Lan_TX4+ 8 Lan_TX4-
6. Line-Out Connector
PIN Definition PIN Definition
1 LINE_OUT_Left 2 LINE_OUT_Right
3 AUDIO_AGND 4 AUDIO_AGND
5 LINE_IN_Left 6 LINE_IN_Right
7 AUDIO_AGND 8 AUDIO_AGND
9 Micro phone_IN1 10 Micro phone _IN2
8 & 9. USB Connector [refer to P.17, No. 10 jumper setting]
PIN Signal PIN Signal
1 5V 5 5V
2 D- 6 D-
3 D+ 7 D+
4 GND 8 GND
11. COM 3 ( RJ-45 ): RS-232 [refer to P.21, No. 22 jumper setting]
12. COM 2 ( DB-9 ): RS-232
Pin Definition Pin Definition
1 DCD 2 RX
3 TX 4 DTR
5 GND 6 DSR
7 RTS 8 CTS
9 RI