Fes6911, A.1 programming, Configuring sequence description – Acnodes FES 6911 User Manual
Page 46
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
FES6911
Fanless Embedded Controller comes with
Intel Atom N270 1.6GHz Processor
A.1 Programming
FES-6911 utilizes ITE 8712 chipset as its watchdog timer controller.
Below are the procedures to complete its configuration and the Acnodes intial watchdog timer
program is also attached based on which you can develop customized program to fit your
application.
Configuring Sequence Description
After the hardware reset or power-on reset, the ITE 8712 enters the normal mode with all logi-
cal devices disabled except KBC. The initial state (enable bit ) of this logical device (KBC) is
determined
by the state of pin 121 (DTR1#) at the falling edge of the system reset during power-on reset.