Fes6911, 1 installation, Step 1 - install chipset driver – Acnodes FES 6911 User Manual

Page 43: Step 2 - install vga driver, Caution

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FES6911

Fanless Embedded Controller comes with

Intel Atom N270 1.6GHz Processor

4.1 Installation

Insert the FES-6915 CD-ROM into the CD-ROM Drive. The Autorun program will run automatically. You
also can choose the drivers to install from step 1 to step 4 in order as following instructions.

Step 1 - Install Chipset Driver

1. Click on the Step 1-INF folder and then double click on the Setup.exe

2. Follow the instructions that the window shows

3. The system will help you install the driver automatically

Step 2 - Install VGA Driver

1. Click on the Step 2-VGA folder and select the OS folder your system is

2. Double click on the Setup.exe located in each OS folder

3. Follow the instructions that the window shows you

4. The system will help you install the driver automatically

Caution:

In Acnodes products with Intel embedded graphics chipset, when system booting before CRT / LCD
monitor has disconnected to VGA, it will cause Intel graphics chipset automatically detected without
CRT / LCD connection and set CRT output to disable. Therefore, CRT / LCD screen will go black and
never recovered on Windows.

Because it's a limitation on application for Intel embedded graphics driver under Windows XP. Therefore,
there is a simply way to recover CRT / LCDoutput through Hot-Key function by Intel suggestion as follows:

You need to press

key simultaneously to recover VGA output again. This hot-key

function is only in the Windows driver version 6.14.10.4497 or later.