Kd 9170n – Acnodes KD 9170N User Manual

Page 2

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

KD 9170N

17” Short Depth Monitor Keyboard

Drawer

LEGAL INFORMATION

Information in this document has been carefully checked for accuracy; however, no guarantee is
given to the correctness of the contents. The information in this document is subject to change
without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
? Unplug equipment before cleaning. Don't use liquid or spray detergent; use a moist cloth.
? Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned
environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
? When installing, place the equipment on a sturdy, level surface to prevent it from accidentally
falling and causing dam
age to other equipment or injury to persons nearby.
? When the equipment is in an open position, do not cover, block or in any way obstruct the gap
between it and the
power supply. Proper air convection is necessary to keep it from overheating.
? Arrange the equipment's power cord in such a way that others won't trip or fall over it.
? If you are using a power cord that didn't ship with the equipment, ensure that it is rated for the
voltage and current
labeled on the equipment's electrical ratings label. The voltage rating on the cord should be higher
than the one listed
on the equipment's ratings label.
? Observe all precautions and warnings attached to the equipment.
? If you don't intend on using the equipment for a long time, disconnect it from the power outlet to
prevent being dam
aged by transient over-voltage.
? Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid
spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
? Only qualified service personnel should open the chassis. Opening it yourself could damage the
equipment and invali
date its warranty.
? If any part of the equipment becomes damaged or stops functioning, have it checked by qualified
service personnel.