1general – Tyco Electronics FOSC-400D5 User Manual
Page 3
1
General
1.1
The installation instruction describes the necessary steps to install the
FOSC-400D5. The product may be used on an optical fiber cable using loose tube and slotted core
constructions as well as ribbon fiber cable.
1.2
The FOSC-400D5 kit is supplied with one splice tray organizer. Each tray accommodates
up to 36 fiber splices max. Supplementary tray kits may be used (up to 7 extra trays maximum per
closure), increasing the capacity of FOSC-400D5 up to 576 single fusion splices.
1.3
The splice tray accommodates fusion splice protection type such as Raychem SMOUV-
1120-serie and mechanical splices (GTE, ATT, CSL,FIBRLOCK, SIECOR, AMP or other
similar products).
1.4
FOSC-400D5 has one oval cable entry port which can handle 2 cables. Five large
circular ports will handle one cable each.
1.5
The FOSC-400D5 can be installed in direct buried, manholes or aerial locations