Using stopwatch and setting alarms – SUUNTO G6 & G6 Pro User Manual

Page 25

6. USING STOPWATCH AND SETTING ALARMS

You can use Suunto G6 as a stopwatch or as a tool to remind yourself of an important
event with an alarm.

6.1. Using the stopwatch
You can start the stopwatch when you are in the Time mode.
1. Press the BACK/ALT button a few times, until 0.00,0 (min.sec) is displayed on the

bottom row.

2. Press SELECT to start the stopwatch.

TIP

: You can mark a split time by pressing SELECT. The split time is dis-

played for a moment and then the timer continues to run.

3. Press the BACK/ALT button to stop the timer.
4. You can restart the timer by pressing the SELECT button.

NOTE

: You can reset the stopwatch with a long press of the BACK/ALT but-

ton.

6.2. Setting an alarm
You can set an alarm to remind yourself of an important event. When an alarm is set,

is displayed in the lower right corner of the display.

1. Browse to Time mode and press ENTER.
2. Select Alarm.
3. Set the alarm to On.
4. Set the time and date for the alarm with the UP/DOWN buttons. Press ENTER to

This manual is related to the following products: