Yamaha PSR-410 - Manual (Page 39)

37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
■ The [RESET] Button
Press the SONG [RESET] button to go directly to the first measure of
the song and turn ON all tracks that contain data. Measure number “001”
will appear on the MULTI DISPLAY. The [RESET] button also functions
during playback or recording.
■ Record Or Play from a Specified Measure
You can start SONG MEMORY recording or playback from any specified measure, as long as the specified
measure is within the range of measures that has already been recorded:
Z
Press the [MEASURE #] Button If Necessary ......................................................................................
If the measure number is not currently shown on the MULTI DISPLAY,
press the [MEASURE #] button. If the measure number is already showing,
go directly to step X.
MEASURE #
RESET PLAY / STOP
C
Start Playback or Recording .................................................................................................................
Start playback or recording. You can now start playback or recording
from the specified measure number.
NOTES
• This function allows you to “punch-in” and “punch-out” at any measure
to re-record a section of a previously-recorded track.
X
Enter the Desired Measure Number .....................................................................................................
Use the [+] and [–] buttons, the number buttons, or the [MEASURE #]
button itself to enter the desired measure number.
0 2 1
RESET
– +
Example:
Start Recording
(Punch In)
Stop Recording
(Punch Out)
Old Data
(Same as Before) Old Data
(Same as Before)
New Data
1 2 3 4 5 6 7 8 9 Before Punch In/Out
After Punch In/Out
▲ ▲
VOICE
B
VOICE
A
1 2 3 4 5 6 7 8 9
VOICE
B
VOICE
A
VOICE
C
NOTES
• Recording is carried out in 1-measure units, so if you punch out in the
middle of measure rests will be recorded for the remainder of that
measure.
• Voice, volume, pan, pitch
bend, tempo, harmony on/off,
dual on/off, and revoice data
changes made during the
punch-in remain in effect
even after the punch-out
point, until further parameter
changes are encountered in
the old data.