Acclaim Lighting AL Net 8 - Manual (Page 8)

www.acclaimlighting.com Page 8
For these connected Nodes controlling the fixtures correctly, all nodes which are used to control the
Fixtures MUST be set up individual IP address in this Setup software.
Enter a valid integer value of node
(AL-Net 8’s) quantity which will be used as needed in the entire
system in the top left box marked IP. Then under IP Address, enter the IP Address from the back of your
AL-Net 8.
172.16.0.0, 172.16.0.3 and 172.16.0.255 are not available.
Click the Test Hardware checkbox and click Save Set.
All settings will be saved automatically.