Accell UltraAV USB to HDMI Video Adapter User Manual

Page 2

3. To launch the installer, double click on the icon “DisplayLink-OSX-1.6.dmg”.

4. The installation window will open. Select the “DisplayLink Software Installer” icon. Note the

“User Guide” menu option. Return to this menu to view the User Guide.

5. The Welcome screen appears. Select “Continue”

6. The Software End User License Agreement appears. To continue select “Agree”.

7. The software will now install. The computer screen may flicker during this process.

8. After the installation is completed you will be instructed to restart your computer.

9. Ensure the computer is finished restarting before continuing.

10. With the second display turned OFF, plug your HDMI cable from the second display into the HDMI port on the adapter.

11. Plug the adapter into the computer’s USB port.

12. Turn the second display On.

13. Set up is now complete. The second display will now be active in Extended mode.

To manage the display settings go to “Displays” in your system “Display Preferences” menu. The “Arrangement” pane in your “Display

Preferences” menu is used to toggle between Mirror and Extend modes.

A detailed DisplayLink software user’s manual in pdf format is included on the Driver CD. Please refer to this document for

more information on driver and product usage.

Assistance: If you have questions regarding the Accell USB 2.0 to HDMI adapter, please check out our Web site at: www.accellcables.com.

Our Web site contains a FAQ (frequently asked questions) section providing answers to the most commonly asked questions. Technical

Support can be reached at 510-438-9288 or toll free 1-877-353-0772 (M-F 9am-5pm PST).

FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

ACCELL 1-YEAR LIMITED MANUFACTURERS WARRANTY

The Accell USB 2.0 to HDMI adapter, which is purchased in the U.S.A. and Canada, is warranted for one year from date of purchase to be

free of defects in material and workmanship. In the event of such defects, the Accell product will be repaired without charge or, at our option,

replaced with a new one if delivered to Accell Corporation prepaid, together with a copy of the dated sales receipt. This warranty excludes

defects due to normal wear, abuse, shipping damage, or failure to use the cable in accordance with the instructions. ACCELL

CORPORATION SHALL NOT BE LIABLE FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE CABLE OR OTHER

ACCELL PRODUCT, LOSS OF TIME, INTERRUPTED OPERATION OR COMMERCIAL LOSS, OR ANY OTHER DAMAGES, WHETHER

INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. This warranty gives you specific legal rights, and you may have other rights that vary

from state to state vary from state to state.

Limitation of Liability.

IN NO EVENT SHALL ACCELL CORPORATION, ITS SUBSIDIARIES OR AFFILIATES, OR THEIR RESPECTIVE PARTNERS,

OFFICERS, DIRECTORS, EMPLOYEES, SHAREHOLDERS, REPRESENTATIVES OR AGENTS (COLLECTIVELY, "ACCELL") BE

LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR INDIRECT DAMAGES (INCLUDING BUT NOT

LIMITED TO, LOSS OF DATA, USE OR PROFITS), HOWEVER CAUSED, WHETHER FOR BREACH OF CONTRACT, NEGLIGENCE,

OR OTHERWISE, AND WHETHER OR NOT ACCELL HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. YOU

AGREE THAT ACCELL'S MAXIMUM LIABILITY ARISING FROM ANY PRODUCT SOLD BY ACCELL SHALL NOT EXCEED THE PRICE

OF SUCH PRODUCT. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF EXCLUSION OF LIABILITY FOR CERTAIN

DAMAGES, SO THE ABOVE MAY NOT APPLY TO YOU TO THE EXTENT SUCH JURISDICTION'S LAW IS APPLICABLE TO THIS

AGREEMENT.

Warranty Returns Procedure.

To return an item under warranty, contact Customer Support by E-mail at [email protected] or call 510-438-9288 to obtain a Return

Authorization (RMA) number. RMA numbers are valid for 30 days from the date of issuance. We are unable to accept returns without an

RMA number. Returns without an Accell issued RMA number clearly printed on the outside of the package will be returned unopened. All

returns must be shipped prepaid at the expense of the shipper. All returns must include a copy of the dated sales receipt. Due to ongoing

improvements, Accell reserves the right to make changes to hardware, packaging and any accompanying documentation without prior

written notice. The information above is believed to be accurate, however Accell assumes no responsibility for any inaccuracies and liability

for direct, indirect, special, incidental, or consequential damages as a result.



J131B-001B-1011