Connection of the devices – Bosch AMC2 ENC-UL2 - Enclosure - Large User Manual
Page 8
8
en
AEC-AMC2-UL2 - Installation manual
F.01U.097.253 | V 3.2 | 2010.01
Bosch Sicherheitssysteme GmbH
Connection of the Devices
Figure 4 Connection of the devices
1.
Mount the AMC on the rail (item 2 in Figure 1) and left
aside the power supply. The second mounting rail is
planned for the extension board.
2.
Put the rechargeable batteries on the bottom of the
housing and secure them beneath the rechargeable
battery clips (item 7 in Figure 1).
3.
Stick the bracket J (Figure 2) on the back of the housing in
such a way that later on not used connectors of the cable
B can fixed with it.
i
NOTICE!
The following steps describe connecting the rechargeable
batteries in 24 V mode. For information on 12 V mode
connections, refer to Section 12 V Mode Variations, page 11.