Candy PVS 606 HL X - Manual (Page 19)

19 19 19 19 19
The cabinet in which your hob will be installed and all adjacent furniture, should be
made of materials which can withstand high temperatures. In addition, all decorative
laminates should be fixed using the heat-resistant glue.
Installation:
• Leave a gap of at least 5 cm between the appliance and the sides of the adjacent
furniture.
• A watertight seal is supplied with the hob.
. Before fitting, turn the hob upside down, with the glass surface facing downwards.
NB Make sure that the glass is pr NB Make sure that the glass is pr NB Make sure that the glass is pr NB Make sure that the glass is pr NB Make sure that the glass is protected. otected. otected. otected. otected.
. Fit the seal round the hob.
. Make sure it is correctly fitted so as to prevent any leakage into the supporting
cabinet.
HOB
Hob with glass surface
facing downwards
Glass
surface of
hob
Watertight
seal
INST INST INST INST INSTALLA ALLA ALLA ALLA ALLATION - B TION - B TION - B TION - B TION - BUIL UIL UIL UIL UILT T T T T-IN -IN -IN -IN -IN