Candy GO W164-10S - Manual (Page 12)

22
Q START/PAUSE BUTTON
When a programme is
selecting, wait for the “STOP”
indicator light to flash before
pressing the START button.
Press to start the selected cycle
(according to the selected
cycle one indicator lights will
go on) .
NOTE: WHEN THE START
BUTTON HAS BEEN
PRESSED, THE APPLIANCE
CAN TAKE FEW SECONDS
BEFORE STARTS WORKING.
CHANGING THE SETTINGS AFTER
THE PROGRAMMES HAS
STARTED (PAUSE)
Once the programme has
started the settings can only
altered by pressing the relevant
buttons.
The programme may be
paused at any time during the
wash cycle by holding down
the "Start/Pause" button for
about two seconds. When the
machine is in the paused
mode, the indicator light "Time
To End", spin speed and option
buttons will flash.
To restart the programme, press
the "Start/Pause" button once
again.
If you wish to add or remove
items during washing, wait 2
minutes until the safety device
unlocks the door.
When you have carried out the
manoeuvre, close the door,
press START button and the
appliance will continue
working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme, set
the selector to the OFF
position.
Select a different programme.
Re-set the programme selector
to the OFF position.
EN SL
TIPKA START
Ko je program izbran,
poãakajte, da zaãne utripati
kontrolna luãka STOP, nato
pa pritisnite na tipko START.
S pritiskom na tipko START
zaÏenete izbrani program
(osvetli se ustrezna kontrolna
luãka).
OPOMBA:
STROJ LAHKO ZAâNE
DELOVATI ·ELE NEKAJ
SEKUND PO PRITISKU NA
TIPKO START.
Spreminjanje nastavitev po
zaãetku izvajanja izbranega
programa
V vsakem trenutku lahko
program zaãasno prekinete -
pribliÏno 2 sekundi pritiskajte
na tipko Start/pavza. Ko je
stroj v naãinu pavze, utripata
kontrolni luãki 'âas do
konca programa', hitrost
centrifugiranja in tipke za
opcije. Ko Ïelite s pranjem
nadaljevati, spet pritisnite na
tipko START/Pavza.
âe Ïelite med pranjem
dodati kak‰en kos perila v
stroj, poãakajte 2 minuti,
da se sprosti varnostni zapah
vrat in da se vrata odklenejo.
Nato spet zaprite vrata stroja
in pritisnite na
tipko START/Pavza; stroj bo
nadaljeval s pranjem, kjer je
bil program prekinjen.
Preklic potekajoãega
programa
âe Ïelite preklicati program,
obrnite gumb za izbiranje
programov na poloÏaj “OFF”
(Izklopljeno).
Izberite drugi program.
Gumb za izbiranje programov
obrnite na poloÏaj “OFF”
(Izklopljeno).