34 - using the ceramic hob – Candy PVI 4100 User Manual

Page 34

34 -

USING THE CERAMIC HOB

After powering up the hob, wait 8 seconds to activate the electronic controls.

. Press the button , for 3 seconds.

Electronic control of the hob is activated. In each display zone the heat level is

displayed and the control LED blinks.

. After 10 seconds without use, the electronic control goes off and the starting operation

has to be repeated.

. Each pressure on an active key is confirmed by a beep.

STARTING A COOKING ZONE

. Press the selection button of the required cooking zone. In the display zone, the

control LED is on steady. It shows that the zone is live.

. Press the or button to select a heat level between 1 and 9.

è Press the button and heat level 1 is displayed, press the button and

heat level 9 is displayed.

è Hold down the or button and the heat level increases or decreases gradually.