Programme selector – Candy GO W496D-AUS User Manual
Page 9
16
17
SPECIAL “RINSE” PROGRAMME
This programme carries out three rinses with a intermediate spin (which
can be reduced or excluded by using the correct button). It can be used
for rinsing any type of fabric, eg. use after hand-washing.
This program can be also used as cycle of Bleaching (see table of washing
cycle programmes).
SPECIAL “SPIN” PROGRAMME
Programme “SPIN” carries out a maximum spin (which can be reduced by
using the correct button).
DRAIN ONLY
This programme drains out the water.
“MIX & WASH SYSTEM” PROGRAMME
This is an exclusive Candy system and involves 2 great advantages for
the consumer:
• to be able to wash together different type of fabrics (e.g. cotton +
synthetic etc…) FAST COLOUREDS;
• to wash with a considerable energy saving.
The "Mix & Wash" programme has a temperature of 40°C and alternate
dynamic phases (the basket that turns) to static phases (fabrics in soak
in phase of rest) with a duration programme that almost reaching the 2
hours.
The energy consumption for the complete cycle is only 850 W/h.
Important:
•the first washing of new coloureds fabrics must be done separately;
• in every case, never mix NON-FAST COLOUREDS fabrics.
RAPID PROGRAMME
This programme is particularly suited to slightly dirty cottons and mixed
fabrics. Using the Stain Level button on the Rapid cycle will enable you to
select either a 14, 30 or 44 minute wash cycle.
When selecting the rapid programme, please note that we recommend you
use only 20% of the recommended quantities shown on the detergent
pack. For information about these programmes please refer to the programmes
table.
“SHIRTS” PROGRAMME
This programme allows a complete washing cycle for shirts.
The main wash and the rinse gives best results thanks to the rotation
rhythms of the drum and to the water levels.
The programme has a maximum temperature of 30°C and concludes with
3 rinses and a short spin.
Programme selector
For the various types of fabrics and various degrees of dirt the washing machine has
different programme bands according to: wash cycle, temperature and lenght of cycle (see
table of washing cycle programmes).
COTTONS
The Cotton programme includes a Prewash cycle. This option is
particularly useful for really dirty loads and can be used independently of
the main wash programme. Additional detergent for the Prewash part of
the programme should be added to the first compartment of the soap
drawer labelled "1" (please refer to the section of this manual entitled
“Detergent”). We recommend you use only 20% of the quantity used for
the main wash programme.
The Cottons programme is also designed for maximum washing and
rinsing efficiency. With spin cycles in between, the programme guarantees
the laundry is rinsed perfectly. The final spin cycle ensures laundry is spun
dry as much as possible up to the maximum speed.
MIXED AND SYNTHETIC FABRICS
The main wash and the rinse gives best results thanks to the rotation
rhythms of the drum and to the water levels.
A gentle spin will mean that the fabrics become less creased.
SPECIAL DELICATE FIBRES
This is a new wash cycle which alternates washing and soaking and is
particularly recommended for very delicate fabrics.
The wash cycle and rinses are carried out with high water levels to ensure
best results.
WOOLMARK PROGRAMME
The special cycle enables to thoroughly wash garments without
damaging them. The cycle comprises of alternate periods of activity and
pauses. The programme has a maximum temperature of 40° and
concludes with 3 rinses and a short spin.
SPECIAL “HAND WASH”
This washing machine also has a gentle Hand Wash programme cycle.
This programme allows a complete washing cycle for garments specified
as “Hand Wash only” on the fabric care label. The programme has a
temperature of 30°C and concludes with 3 rinses and a slow spin.