JVC KW-AV70BT - Manual (Page 11)

11
ENGLISH
Operations on the screen
Setting
Change the settings of how to display the buttons, the
sensitivity of the motion sensor, and how the screen is
changed when no operation is performed for a while.
1
On <AV Menu> screen:
2
3
Selects the method to show the buttons and playback
information.
Motion Shows the buttons and playback
information when you move your hand
closer to the motion sensor.
• The motion sensor does not work when
the screen is turned off. (☞ page 8)
Touch Shows the buttons and playback
information when you touch the screen.
Off Deactivates the <Motion> or <Touch>
function.
• To hide the buttons and playback information again
when <Motion> or <Touch> is selected, touch the
screen repeatedly.
Selects the sensor sensitivity (<High> or <Low>).
• Available when <Sensor> is set to <Motion>.
Selects the items shown on the screen when no
operation is performed for approximately 10 seconds
and when the light of the /MENU on the monitor
panel is turned off.
• Available when <Sensor> is set to <Motion> or
<Touch> (☞ above).
Simple Shows source information and some
source control buttons (such as volume
control buttons).
Backgrnd The background is shown.
BlackOut The screen is turned off.
• To restore the screen:
– When <Sensor> is set to
<Motion>, move your hand
closer to the motion sensor.
– When <Sensor> is set to
<Touch>, touch the screen.
EN_KW-AV70EU.indb 11 EN_KW-AV70EU.indb 11 11/12/13 16:39 11/12/13 16:39