JVC KW-AV71BT User Manual
Page 68

68
ENGLISH
Symptom
Remedy/Cause
D
ivX/MPEG1/MPEG2/
JPEG/MP3/WMA/W
AV
Disc cannot be played back.
• Record the tracks using a compliant application on the
appropriate discs. (☞ page 19)
• Add appropriate extension codes to the file names.
Tracks are not played back as you have
intended them to play.
Playback order may differ from the one played back using
other players.
USB/SD
“Now Reading...” does not disappear from
the screen.
Turn off the power and on again.
While playing a track, sound is sometimes
interrupted.
The tracks are not properly copied into the USB device or
the SD card. Copy tracks again, and try again.
iP
od/iPhone
No sound comes out of the speakers.
• Disconnect the iPod, then connect it again.
• Select another source, then reselect “iPod”.
The iPod/iPhone does not turn on or does
not work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Check whether the iPod control mode is correctly
selected. (☞ page 30)
• Reset the iPod/iPhone.
Sound is distorted.
Deactivate the equalizer either on this unit or the iPod/
iPhone.
A lot of noise is generated.
Turn off (uncheck) “VoiceOver” of the iPod. For details, visit
No operations are available when playing
back a track containing Artwork.
Operate the unit after the Artwork is loaded.
Sound does not synchronize with the video.
Select [iPod] for <AV Input>. (☞ page 45)
• Videos cannot be played.
• No sound of videos come out.
• Connect with USB Audio and Video cable JVC KS-U30.
Other cables cannot be used.
• Select [iPod] for <AV Input>. (☞ page 45)
AV
-IN
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
EN_KW-AV71E.indb 68
EN_KW-AV71E.indb 68
12/11/20 11:17
12/11/20 11:17