HONDA 2013 Civic Navigation - Manual (Page 117)

116
Playing FM/AM Radio
Selecting FM/AM Mode
1. Press the FM/AM button.
 Press the FM/AM button again,
if necessary, to select the
frequency band (FM1, FM2,
AM).
 The band and frequency are
displayed.
2. Select AUDIO/STREET until
AUDIO is highlighted in blue.
 The preset keys are displayed at
the bottom of the screen.
3. Select the preset key.
 You can also select a station
using the SEEK/SKIP button.
1 Playing FM/AM Radio
d “Display audio screen”
You can control the radio using voice
commands.
2 Radio Commands P. 201
A visual guide helps you operate the audio
system.
2 System Controls P. 4
2 Basic Operation P. 6
The ST indicator comes on the display for stereo
FM broadcasts. Stereo reproduction in AM is not
available.
The radio can receive the complete AM and FM
bands:
AM band: 530 to 1710 kHz
FM band: 87.7 to 107.9 MHz
You can store six AM stations and 12 FM stations
in the preset buttons. FM1 and FM2 let you store
six stations each.
Preset keys
QRG
Index
Home
2013 Civic
Audio