System setup, 2011 odyssey – HONDA 2011 Odyssey Navigation User Manual
Page 106

106
Navigation System
System Setup
After selecting the choice, a
map
screen
will be displayed.
Rotate the
Interface Dial knob
to
select the map scale. Use the
Interface
Dial
to move the crosshairs (red circle)
to the desired start point and push in on
the
Interface Dial
to “set” the start
point. Then move the
Interface Dial
in
a straight or diagonal direction to
encompass the area to be avoided.
NOTE:
The maximum size of the “Avoid area”
is 1/2 mile in length or width.
The selected area will be displayed as a
shaded box with a yellow border. Push
in on the
Interface Dial
to set the end
point of the avoided area. To “redraw”
the area, select
CANCEL
and repeat the
area selection process.
Say or select
OK
to return to the
Edit
avoid area
screen.
If your selected area contains a freeway,
the system will prompt you with a pop-
up box saying “Do you want to avoid
freeways?” Answering “No” allows you
to enter a route through an avoided area
on a freeway and skip the “Avoid area
caution box” (see Pop-ups and
Disclaimers on page
When you return to the
Edit avoid area
screen, the “Area” field is automatically
filled in by the system. Re-edit the area
“Name” if desired. Select
OK
on the
Edit avoid area
screen to finish editing.
Your new avoided area will now appear
on the “Avoid area” list and be viewable
on the
map
screen.
NOTE:
You can select areas to avoid, however
you cannot select roads or areas that
you want the system to use for routing.
2011 Odyssey