HONDA 2008 CR-V Navigation - Manual (Page 46)

46 Navigation System
Viewing the Routes
Touching View Routes allows you to
scroll through and view the various
routes (Direct, Easy, Maximize
Freeways, etc.) to your destination. If
you select
View Routes , the display
changes to:
You can change the method for
calculating the route by using the voice
control system and saying “Next” or
“Previous” or by touching
Next or
Prev . The system will display another
calculated route.
NOTE:
• The selected route method and
pertinent details are shown at the top
of the screen.
• It may take several minutes (the
system displays an hour glass while it
is calculating) to show all route
methods, and it is not unusual for the
different methods to pick the same
route. Voice commands cannot be
used while the system is calculating.
• If the trip is greater than 100 miles,
then “Minimize Freeways” and
“Minimize Toll Roads” may be
grayed out. This is normal.
• Zoom IN/OUT to view route details is
not available on this screen. After you
choose a “route method,” you can
then zoom in or out on the
map
screen to view your route in details.
Say or select Summary to display the
distance and time to go for each route.
Based on the summary data, you can
change the routing by using the
Next
and Prev . buttons.
Once you confirm your selection, say
“OK” or select
OK on the screen.
NOTE:
Distances and times show for each
method in the Summary are
approximate.
After calculating the route with the new
method, the system displays a map of
your current location. The calculated
route will be highlighted as a blue line,
and a voice prompt will tell you how to
proceed along the highlighted route.
Touch
VOICE to have the guidance
repeated.
Driving to Your Destination
2008 CR- V
Main Menu