HONDA 2008 Element - Manual (Page 76)

Push the lever back
until you hear a click to turn on the
high beams. The blue high beam
indicator will come on (see page
).
Pull the lever back again to low
beams.
With the headlight switch off or in
the
position, the high beam
headlights and the high beam
indicator come on with reduced
brightness when you turn the
ignition switch to the ON (II)
position and release the parking
brake. They remain on until you turn
the ignition switch off, even if you
set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
You can change the instrument panel
brightness only when the light
switch is on.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
To adjust the brightness, turn the
knob on the instrument panel.
63
Canadian models only
High Beams Daytime Running Lights Instrument Panel Brightness
Turn Signal and Headlights, Instrument Panel Brightness
72
2008 Element
Table Of Contents Main Menu