beautypg.com

Automatic transmission – HONDA 2008 Element User Manual

Page 166

background image

Use neutral if you

need to restart a stalled engine, or if
it is necessary to stop briefly with
the engine idling. Shift to the Park
position if you need to leave your
vehicle for any reason. Press on the
brake pedal when you are moving
the shift lever from neutral to
another gear.

Press the brake

pedal and press the release button to
shift from Park to reverse. To shift
from reverse to neutral, come to a
complete stop, and then shift.

To avoid transmission damage, come
to a complete stop before shifting
into Park. You must also press the
release button to shift into Park. The
shift lever must be in Park before
you can remove the key from the
ignition switch.

If you have done all of the above and
still cannot move the lever out of
Park, see

on

page

.

Use this position for

your normal driving. The
transmission automatically selects a
suitable gear (1 through 5) for your
speed and acceleration. You may
notice the transmission shifting up at
higher engine speeds when the
engine is cold. This helps the engine
warm up faster.

To use D , press the

D button when the shift lever is in
the ‘‘D’’ position. This position is simi-
lar to D, except only the first three
gears are selected instead of all five.
Use D when towing a trailer in hilly
terrain, or to provide engine braking
when going down a steep hill. D can
also keep the transmission from
cycling between third and fourth
gears in stop-and-go driving.

163

3

3

3

3

Automatic Transmission

Neutral (N)

Reverse (R)

Shif t Lock Release

Drive (D)

Drive (D )

3

162

2008 Element

Table Of Contents

Main Menu

This manual is related to the following products: