HONDA 2008 Element - Manual (Page 229)

Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch. Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground. Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up. 9. 10. 11.
CONTINUED
Changing a Flat Tire
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
225
EXTENSION
JACKING POINTS WHEEL NUT WRENCH
2008 Element
Table Of Contents Main Menu