HONDA 2012 Civic Sedan - Manual (Page 301)

uu If a Tire Goes Flat u Changing a Flat Tire
300
H
a
nd
ling
t
h
e Un
exp
e
cted
1. Open the trunk floor lid.
2. Take the tool case out of the trunk. Take
the jack and wheel nut wrench out of the
tool case.
3. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tire.
4. Place a wheel block or rock in front and rear
of the wheel diagonal to the flat tire.
■ Getting Ready to Replace the Flat Tire 1 Getting Ready to Replace the Flat Tire
NOTICE
Do not mount the compact spare on the front. If
mounted on the front, the compact spare, smaller in
size than the normal tire, may damage the
differential.
If either front tire goes flat, remove the rear tire on
the same side, and mount the compact spare on the
rear and the rear tire on the front.
2.4 ℓ engine models
Tool Case
Spare Tire
Wheel
Blocks
The tire to be replaced.
CIVIC 4D-31TR3600.book 300 ページ ２０１１年２月１４日 月曜日 午後２時５１分
2012 Civic Sedan
TOC
Home
QRG
Index