Rear license plate light bulb – HONDA 2012 Civic Sedan User Manual
Page 277
276
uu
Replacing Light Bulbs
u
Rear License Plate Light Bulb
Mainten
a
nce
Rear License Plate Light Bulb
When replacing, use the following bulb.
1. Remove the screw from the center of the
fastener using a Phillips-head screwdriver.
2. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
3. Remove the license plate light assembly by
squeezing the tabs on both sides of the
socket.
4. Remove the old bulb and insert a new bulb.
Rear License Plate Light: 5 W
Lining
Clip
Fastener
Models with trunk lid lining
Bulb
Socket
All models
CIVIC 4D-31TR3600.book 276 ページ 2011年2月14日 月曜日 午後2時51分
2012 Civic Sedan
TOC
Home
QRG
Index
This manual is related to the following products: